EVIQO Level 2 EV Charger 40 Amp - 9.6 kW 240V Wall Home EV Charger Level 2, NEMA 14-50 Plug, J1772 25' Cable - Enhanced Wi-Fi – UL, ETL Certified EVSE, Smart Electric Vehicle...

EVIQO Level 2 EV Charger 40 Amp - 9.6 kW 240V Wall Home EV Charger Level 2, NEMA 14-50 Plug, J1772 25' Cable - Enhanced Wi-Fi – UL, ETL Certified EVSE, Smart Electric Vehicle...

EVIQO Level 2 EV Charger 40 Amp – 9.6 kW 240V Wall Home EV Charger Level 2, NEMA 14-50 Plug, J1772 25′ Cable – Enhanced Wi-Fi – UL, ETL Certified EVSE, Smart Electric Vehicle…

4.8 out of 5

7 customer reviews|Add a review

$510.00

Fast Charging: 40A Level 2 charger provides 9.6 kW power, charging vehicles up to 38 mph, 8X faster than basic portable chargers.
Certified Safety: UL, ETL, FCC & Energy Star certified; eligible for rebates and incentives, including a 30% Federal Tax Credit.
Durable Design: NEMA 4/IP66 rated housing withstands harsh weather conditions, and internal components are protected by steel shielding.
Smart Control: Enhanced Wi-Fi connectivity and app support for remote control, scheduling, and monitoring of charging sessions.
Universal Compatibility: 25′ J1772 charging cable compatible with all EVs and PHEVs in North America; can be used with Tesla vehicles using an NACS adapter (not included).
Easy Installation: Plug-and-play setup with no electrician required; wall mounting kit and instructions included.
Warranty & Support: 3-year warranty with US-based customer support available Monday to Saturday.

Category: Automotive Brand: EVIQO

Description
Additional information
Reviews (7)

Description

Fast 40A EV Level 2 Charger: 8X faster than basic portable ev charger. Power up at 9.6 kW – up to 38 mph. EV chargers for home level 2 requires a 240V NEMA 14-50 receptacle (40A or 50A circuit rating)
UL, ETL, FCC & Energy Star Certified: EVIQO electric vehicle charger is eligible for rebates and incentives (incl. 30% Federal Tax Credit). Mainboard steel shielding protects the internals of the EV charging station. External reset button clears faults in seconds. NEMA 4/IP66 housing survives rain, snow, sleet, heat and dust
Enhanced WI-FI Antenna + Smart App: Advanced Wi-Fi keeps EVIQO EV car charger level 2 online in garage & basement. Control start/stop, set 6-40A current with 1A step, set schedules for your electric car charger & charge off-peak, get reminders & track consumption/cost right in the app. Remote OTA firmware updates (2.4 GHz)
Universal J1772 Charger: 25’ EV charging cord reaches any spot. Works with every EV/PHEV in North America. Heavy duty fully rubberized J1772 connector. Operates as a tesla home charger with NACS adapter (not included)
5-Minutes Installation: Plug & Charge EVSE level 2 charger out of the box, no electrician needed (wall mounting kit and guide included with electric car charger level 2)
3-Year Warranty: Backed by US-based customer support Mon–Sat 8 AM-4 PM PT. EVIQO works as VW ID 4 home charger, Nissan Leaf Charger, Ford Mach E Charger, IONIQ 5 charger, Chevy Bolt charger, Chevy Volt charger, Jeep level 2 charger and Honda Prologue charger. Works with Kia, i4, iX, Mercedes, Mazda, Genesis, Hummer, Audi and 30+ other car OEM

Additional information

Manufacturer	‎EVIQO
Brand	‎EVIQO
Model	‎EVIPOWER-2
Item Weight	‎21.3 pounds
Product Dimensions	‎4 x 9.45 x 9.45 inches
Item model number	‎EVIPOWER-2
Manufacturer Part Number	‎EVIPOWER
Date First Available	January 15, 2025

7 reviews for EVIQO Level 2 EV Charger 40 Amp – 9.6 kW 240V Wall Home EV Charger Level 2, NEMA 14-50 Plug, J1772 25′ Cable – Enhanced Wi-Fi – UL, ETL Certified EVSE, Smart Electric Vehicle…

5 out of 5

G. Castillo – September 2, 2025

I own a Chevrolet Bolt 2019 model. When I bought this car, initially, I used the standard Level 1 charger that was supplied with the car. Since the performance of this charger was unsatisfactory, in October 2019, I bought a JuiceBox 40 Smart EV charging station (Level 2) with Wi-Fi. It turned out to be anything but “smart” but that would be a different story/review.

On January 3, 2024, when I walked out into the garage, JuiceBox welcomed me with beeping noises. After a little bit of diagnostics myself, I called ENEL (manufacturer) customer service. Here, I would like to state that ENEL customer service is among the best. The customer service representative had me repeat a few of the diagnostic steps and declared the unit dead. The device used a mechanical relay which had a known issue. Since I was among their earliest customers and the unit had a known issue, I was offered a replacement newer model at $100 discount. Don’t ask me why I was never informed of the “known” issue and a replacement sent to me when the “issue” was discovered! In any case, it was a complicated process (digging up old receipts, ENEL back-end system failures, etc.) but a replacement was ordered the same day (01/03/2024). Given my situation, I was promised a priority overnight shipment. Lo and behold, it is 01/09/2024, there is still no sign of a replacement. Every time I called, I was told the replacement was ready for shipment and waiting for the “carrier” to pick it up! Great customer service can go only so far if the rest of the company functions are not supportive enough. I knew it was time to look for an alternative and canceled my JuiceBox upgrade order.

I am a retired computer scientist and engineer, and it is my nature to research everything about my choices before deciding to buy a specific product. Accordingly, I made a list of top Level 2 EV chargers and started reading installation instructions, user guides, expert reviews, and user reviews. After all the hard work, my choice was narrowed down to: Tesla or EVIQO. Given my recent decision to boycott all Musk owned businesses, the final decision was easy. However, what sealed the deal was when I called EVIQO customer service with a question on a Sunday and, guess who answered the call, a co-founder of the company! My question was satisfactorily answered, and I ordered my charger.

The unit was received promptly, and I installed it without a hassle. It has been in operation for more than 6 weeks now and is working to my satisfaction charging the Bolt after midnight when the rates are the cheapest. In fact, the installation and setup were a breeze compared to JuiceBox. Please note that I ordered a pluggable unit, and I already had the requisite 240V (NEMA 14-50) outlet in the garage. Based on my experience, all parts are high quality and, in some cases, better than the competitors. In my humble opinion, EVIQO charger is a superior product and I wholeheartedly recommend it.

I did run into one non-technical issue – I am a member of the SmartCharge New York (SCNY) program which offers rebates for responsible use of EV charging. While JuiceBox was a SCNY-certified charger, unfortunately, EVIQO is not. I have requested SCNY to certify the EVIQO device but don’t know how long the process is. It is my fault that I did not investigate this beforehand and stand to lose about $500 every year if the program continues and the EVIQO device remains unsupported.

Given my background, I do have a few suggestions for improvements, however, I am not an electrical engineer and don’t know how feasible some of the suggestions are. I compared the installation of EVIQO to installing and setting up the Starlink service. My experience with Starlink was the absolute best even though I had to cancel the service because of distaste for Mr. Musk’s line of thinking. My Starlink unit was shipped with everything a homeowner may need for the installation, even a small piece of well-designed plastic stick to snake a wire through a 6-9″ thick wall. Here are some of the salient corrections and/or suggested enhancements:

1, Page 10 mentions needing a level and a stud finder, however, I did not see any mention of these two tools again in the installation instructions.
2. I am a tool nut and already own a stud finder. However, I was unable to find a suitable “studded” location for the installation. The supplied M6 Hexagonal Expansion screws are not suitable for drywall installation. I bought and used heavy-duty anchors (and compatible screws) from the local hardware store. I wish such anchors were included with the product.
3. Page 15 mentions 0.31″ (8 mm) drill bit, which would be 5/16″ for us retarded Americans.
4. I wish there were a way to separate and, independently, configure input and output power cable to/from the charger. Please look at the picture, I was forced to cross the input and output cables because of the location of the outlet which made part of the installation process a little difficult.
5. For better or worse, most garages are storage space for junk and mine is no different. While the charger unit is inside, the car is outside the garage. This makes routing the output cable under the garage door a challenge! If I had my wish, I would have drilled a nice clean hole through the garage wall, mounted an additional holster outside, routed the output cable through the hole, and plugged it into the charger. Imagine if the charger had twist-lock receptacles for input and output cable ports (top and bottom instead of the current both at the bottom)! This would help with cable crossing issues and help with keeping the two cables independently routable.
6. There is no good reason to justify the annoyingly blinking green LED indicating waiting to start. Since I use scheduled charging, this is the most common situation in my case. I would recommend dim green for “Ready to start” and brighter green for “Waiting to start”.

As far as the mobile application to control the EVIQO, it is better than the most. It has been my life experience; software is always an afterthought for hardware manufacturers. However, that is not the case EVIQO, although I did have some usability challenges because the application is designed to be compatible with Android and iOS (the one I am used to). It will be helpful to simplify the functionality related to inputting utility rate structure and usage of this information with scheduled charging times.
5 out of 5

Mohan – September 9, 2025

I couldn’t be happier with the EVIQO Level 2 EV Charger! From the sleek design to its flawless performance, this charger is truly a game-changer for EV owners.

Installation: The setup process was straightforward and hassle-free. The included instructions were clear, and it took very little time to get everything up and running.

Performance: Charging my EV is now faster than ever. It significantly reduces the charging time compared to a standard Level 1 charger, and I can always count on it to deliver consistent power. The charging process is smooth, and I’ve never encountered any issues with connectivity or interruptions.

Design: The modern and compact design blends perfectly with my garage setup. The durable build and high-quality materials give me confidence that it will last for years.

Features: The smart features are a huge bonus. I love being able to monitor charging sessions and adjust settings from the app—it adds so much convenience to my daily routine.

Overall, the EVIQO Level 2 EV Charger is worth every penny. It’s reliable, efficient, and stylish. If you’re looking for a top-tier charger for your EV, this is the one to get! Highly recommended!
5 out of 5

Mathew Abraham – September 10, 2025

UPDATE
Installed, inspected and fast charging. The ease of etting up schedule for charging our Hyundai Tucson plugin hybrid is inexpensive, easy to schedule. Tech support was quick,fast and very helpful both prior to purchase and after purchase and installation. Takes 1 hour 40 min to charge and 12 Kwh @ 2.8 cents /kwh. When plugged into 115 amps takes 12 hours.
Prior to purchase I asked for Tech specs for installing a 50amp service can wire requirements. Also asked about CSA standards and recieved all documentation. Once the electrical service was installed and inspected, this is truly a plug and play unit, that has easy to use software for my android phone. Many Units are available for less money. Safety and Warranty of 3 years and the Tech support is what sold me on this product.
ISSUE TO BE AWARE OF:
There is an issue with our garage door opener connectivity. Suggestions from Tech support did not fix the issue. We tried replacing our garage door remotes, then both backup batteries. Our electrical line is dedicated to only the EVIQO charging station plug. It has been suggested that the problem could be resolved by installing a newer garage door openers.( but no guarantee + costly resolve) as we purchased the plugin version of the EVIQO. The easy fix is to unplug the charger when not charging your vehicle. Our garage door remotes are fully functional now. Just thought I might save someone a lot if grief, problem solving and money by posting this information. I have asked Tech Support to look into this issue.
5 out of 5

Amazon Customer – September 15, 2025

I bought the charger for my new Vinfast VF8 and have been using it for over a month now. The charger has been performing excellent so far. I got the unit installed outside and the charger has worked without any issues at all in extreme cold conditions, rain and snow.

The app is also extremely easy to use. The current can be set from 1 amp to 40 amps by a simple slider on the app. This is very convenient, as you can adjust the charging speed based on the load and requirements. The build quality is also very premium and it is a very well designed and sturdy product, overall.

The manufacturer has contacted me a couple of times to know how happy I am with the product and to know if I require any support. They are available 24/7 for any requirements.

As a very satisfied user, I definitely recommend this charger to anyone to plans to purchase or replace, and it is a value-for-money product and the performance is excellent.
5 out of 5

G. Castillo – October 19, 2025

July 2, 2025 ordered the EVIQO from AMAZON and got it July 5.
The EVIQO (albeit being the only one that I have experience with) is the easier to install/use charger. The only way that I would be easier would be for the EVIQO manufacturer to come to my house install and get it going for me.
I ordered the plug in version thinking that it will be easier to just plug in, but after I got it I decided to just hardwire it to have the option later to charge at full 48A. I got prices for installers to come over and do the install. The install is an easy run, unfinished basement, no ceiling, measured 42ft from the box (south side of house) to the west side of the house (driveway), drill a hole through the siding, mount electrical box and mount charger/plug holder. The first quote through my electric company DTE (Detroit Energy, Michigan) and two other electricians found in the local Facebook neighborhood. The one through DTE wanted after just a video call $2000, another one $1500 plus permit $100 to $150 and the third one just gave me a starting price of $1000, all of them blamed wiring prices and did not trust my measurement of 50ft (I added extra just to be safe) and kept telling me that if it is more that they would have to buy a lot of wire and that the cost was $400 to $500. Decided that this is too much of a hassle so I just took a deep breath and decided to do it myself. I went to the hardware store, big box, bought 50ft each Red and Black 6AWG THHN, 50ft Green 10AWG for the Ground, no need for the Neutral wire, a 60A 2-pole circuit breaker, no need for AFCI, it is built in the charger, a waterproof box for an outlet, the wires for the charger just go in and out of this box. Total Cost in materials $256 and got like 6ft of wire left of each. It took me a while just because I like to overthink things and never done it before. Started at around 11AM. First removed the plug from the charger and connected the wires to the charger (I soldered the wire to the terminals, supplied by the manufacturer, to make a better connection rather than rely on the crimp), then went outside and decided where to mount it and measured multiple times, inside and outside, inside and out, overthinking it, and bit the bullet and started drilling. The wires have to be connected to the charger before you start the installation. So with all the holes drilled for mounting the charger, for the wire to go into the house and for the electrical box I fed the wire from the outside and mounted the charger then started working on the electrical box, it was kind of hard since from the outlet box to the charger it is only around 8in so feeding the 3 thick wires through a 3/4in conduit was a bit hard. I stopped around 6pm, but by the end of the day everything was mounted outside. The following day started around 10am ran the wires to the electrical panel, attached them to the basement joists and connected to the new circuit breaker that I just bought and connected it to the panel, was done by 1pm, for a total of ~10 hrs. Not bad considering that I don’t do this for a living and don’t have all the tools, just a drill, a hammer and screwdriver. With all these connections done now it time for the app. Downloaded the app, setup the account, powered the charger up and within 3 minutes everything was up and running and charging the vehicle. Even though I hardwired the charger I decided to keep the selector switch at 40A (default for the plug in unit that I ordered). I figured the extra 8A (from 40A to 48A) just cut the charging time by 1.5hr. While charging the vehicle the wires and circuit breaker got barely warm. Charged the car from 70% to 80%, recommended by car manufacturer, in 1hr and based on my rate cost me $1.31 for close to 40 miles of driving which would have cost us in the car we traded in close to $4.
You can argue that it took me 10+hrs., well it was not constant work, taking breaks for lunch and thinking, and that my time maybe more valuable, but the satisfaction of doing it and not overpaying makes it worth it. Even if you account for 11hrs @ $100 plus materials it comes to $1360, still less than the installers. And wouldn’t it be nice to make $100 and hour.
I contacted the manufacturer to ask about the lights, they are bright, I was wondering if they can be dimmed or turned off at night when the unit is not in use.
This is the reply:
“Regarding the LED indicators: unfortunately, their brightness is regulated—especially in Southern states—so they must remain clearly visible even in bright sunlight. We understand this might be noticeable at night, and we truly hope it hasn’t affected your overall impression of EVIQO.

If you’d prefer to completely turn off the unit when not in use, a simple option is to unplug it (if using a plug-in model) or flip the breaker connected to the charger.”
At least they replied which is nice to know that they are there, but I do not live in a southern state so I should not be bound by some weird requirement in the south, they have my zip code so based on that you should be allowed to dim or turn off the lights. It is just software. Their recommendation to unplug it or turn it off at the breaker when not in use, is not an acceptable answer from my point of view. I can live with the lights but I would prefer to dim them.
5 out of 5

Mohan – November 16, 2025

We bought the EVIQO EV charger for our new Mach E so we could charge at home and track our charge history / costs. From the minute I opened the box, the quality of this unit was obvious. It was very well packaged, had tech support information right on top, had high quality cables and an awesome rubber coated charge handle.

Installation was easy and so was the setup of the app. I plugged in the car and set the schedule to charge at 7pm to take advantage of low electricity rates. Everything worked as expected. It charged at 7pm and all was good until the next day. I have my vehicle set to warm up and precondition in the morning at a specific departure time, but it didn’t work. I quickly realized the unit would not allow the car to start another charge session to precondition the car after charging the night before.

Disappointed, I emailed EVIQO tech support to see what they suggest or if I setup something wrong. They responded within a few hours and said this was normal, but they could modify the charger firmware to allow multiple charge sessions without have to unplug / plug in the charger again. I could not believe they were willing to do so for my specific issue.

Sure enough, within a few days, I noticed the firmware on the EVIQO charger had updated (on the weekend!). I immediately tried scheduling a charge etc again. It charged as expected and the next morning warmed & preconditioned the vehicle!!

I cannot say enough about the customer support I received from this company. They don’t just make a high quality unit, they stand behind their product and go above and beyond to make sure it works as expected.

Do not hesitate to buy this product.
5 out of 5

Amazon Customer – November 22, 2025

I’ve been using this charger for about six months now with my Chevy Blazer EV, and it has been flawless. Charging is fast and consistent, and the build quality feels premium. The companion mobile app works smoothly and makes it easy to monitor charging sessions and track energy usage.

This is truly one of the best EV chargers I’ve ever used. Thanks to the product developers for creating such a reliable and well-designed solution!

Add a review Cancel reply

EVIQO Level 2 EV Charger 40 Amp – 9.6 kW 240V Wall Home EV Charger Level 2, NEMA 14-50 Plug, J1772 25′ Cable – Enhanced Wi-Fi – UL, ETL Certified EVSE, Smart Electric Vehicle…

Related products

MECMO EV Charger Holder SAE J1772 Wall Mount Charging Cable Hanger Organizer, Nozzle Holster Dock Electric Vehicle EVSE PHEV Car Plug Space Saving Garage Wall Connector Cord…

Lectron Tesla to J1772 EV Charging Adapter – NACS Converter, 48 Amp & 250V, Compatible with Tesla High Powered Connectors, Destination Chargers & Mobile Connectors for J1772…

JKCOVER Center Console Hanging Organizer Box Compatible with 2019-2025 Chevy Silverado/GMC Sierra 1500 and 2020-2025 Chevrolet Silverado/Sierra 2500HD 3500HD…

KUST Windshield Sun Shade for 2017-2026 Tesla Model Y/Model 3 Sunshade Accessories (Fit 2025-2026 Model Y Juniper / 2024 Model 3 Highland) Upgraded Foldable Sunshade, Blocks UV…

LITTLE TREES Car Air Freshener | Hanging Tree Provides Long Lasting Scent for Auto and Home | Black Ice, 24 Air Fresheners

Unitek Tesla Supercharger to CCS Charger Adapter, Max 300W Fast Charge NACS DC to CCS1 Electric Vehicle Charging Adapter Compatible with Tesla Supercharger, Fit for…

Windshield Sun Shade Compatible with 2021-2024 2025 2026 Ford F150 F-150 (Lariat, King Ranch, Platinum, XL XLT Limited Raptor) Accessories Sunshade Shield Protector

Anina EV Charger Holder SAE J1772 Charging Cable Organizer for Portable Electric Car Charger Cable Hanger Electric Vehicle Charging Cord Holder Wall-Mount Connector Space Saving

Benazcap Car Seat Cushion – Memory Foam Car Seat Pad – Sciatica & Lower Back Pain Relief – Car Seat Cushions for Driving – Road Trip Essentials for Drivers

Raylix 16A Level 1 2 EV Charger, 110V-240V Electric Car Charger with 21ft Cable, Adjustable Current and Delay Charging Portable EV Chargers, for All SAE J1772 Nema 6-20/5-15…