-20%

Anina EV Charger Holder SAE J1772 Charging Cable Organizer for Portable Electric Car Charger Cable Hanger Electric Vehicle Charging Cord Holder Wall-Mount Connector Space Saving

Anina EV Charger Holder SAE J1772 Charging Cable Organizer for Portable Electric Car Charger Cable Hanger Electric Vehicle Charging Cord Holder Wall-Mount Connector Space Saving

Anina EV Charger Holder SAE J1772 Charging Cable Organizer for Portable Electric Car Charger Cable Hanger Electric Vehicle Charging Cord Holder Wall-Mount Connector Space Saving

4.6 out of 5

8 customer reviews|Add a review

Original price was: $14.99.Current price is: $11.99.

Compatible Design: Specifically designed for all J1772 charger connectors, suitable for indoor and outdoor use.
Durable Material: Made from high-quality PA material offering superior temperature resistance and toughness compared to ABS.
Waterproof Protection: Features a larger cap with a waterproof edge to guard against rain and dust damage.
Easy Installation: Simple setup by securing the charger into the holster, locking it in place effortlessly.
Space-Saving Solution: Wall-mounted design keeps the charging cable off the ground, preventing clutter and damage.
Smooth Shape: Curved design protects the charging cable from scratches and wear during storage.
Lightweight: Weighs only 5.9 ounces for easy handling and installation.

Category: Automotive Brand: Anina

Description
Additional information
Reviews (8)

Description

Design for J1772 Plug: This EV Charger Holder is compatible with all J1772 charger connectors, the EV charger holster for SAE J1772 is designed for indoor and outdoor use and fit almost all weather conditions
Premium PA Material: This EV Charger Nozzle Holster is made of high quality PA material, which has a higher temperature resistance effect than ABS, and PA is better than ABS in terms of toughness to avoid wear on the charging plug
Waterproof Edge Design: Our Electric Car Charger Plug Holder is designed with a larger cap, adding a waterproof edge to prevent the charger plug from being damaged by rain, while keeping clean and away from dust
Easy Installation: Just plug your EV charger into the Charger Holster Dock, when clicks into place, slide the wall connector holster over the muzzle to keep it securely in place, then the holster will be securely locked to the nozzle without dropping
Wall Mount & Space Saving: This electric car charger hanger be fixed onto most flat surfaces using the tools provided and prevent it from falling off, the Wall-Mount EV Charger Holder can keep the charging cable off the ground and stored in the stand to keep it clean and tidy, with its smooth, curved shape, the charging cable will be prevented from being scratched and broken

Additional information

Manufacturer	‎Anina
Brand	‎Anina
Model	‎EV Charger Holder
Item Weight	‎5.9 ounces
Package Dimensions	‎6.42 x 3.19 x 3.19 inches
Item model number	‎PJ-2401
Manufacturer Part Number	‎PJ-2401
Date First Available	June 18, 2024

8 reviews for Anina EV Charger Holder SAE J1772 Charging Cable Organizer for Portable Electric Car Charger Cable Hanger Electric Vehicle Charging Cord Holder Wall-Mount Connector Space Saving

5 out of 5

Teresa B – August 27, 2025

Easy install,perfect for our Hybrid Jeep
5 out of 5

Larry M. – September 8, 2025

Works very well. The charger clicks in and stays. Nice to have on the wall. Keeps charger cord contained nicely.
5 out of 5

Randi DuFresne – September 17, 2025

very functional but the thing is much smaller than I was expecting – though in their defense, the measurements are posted on the product site.
5 out of 5

Guy – October 11, 2025

Easy to install. Fits my charger for my Jeep 4XE perfectly. Looks good. I have been using it for about two months. I click my charger in and out regularly and it holds great. This is a good value for the money.
5 out of 5

Teresa B – October 12, 2025

I have been driving EV’s for 10 years, but had always draped the cord over the meter since it was so close. This fall we added 2 more EV’s to our households, I used two of these at our house and a third one at my daughter’s house.

Great value – look good, work exactly as advertised.

I did print up a small wedge to keep the the mount vertical on our siding – not sure it was required.
4 out of 5

seanpc798 – October 27, 2025

its not a snug fit. the charger wobbles a little bit when it is inside, but it still locks enough that it wont fall.
5 out of 5

Yung Fang Smith – November 9, 2025

It was easy to install and keeps my charging cable off the floor. It seems sturdy and the charger (lectron) is held securely, but slides in and out easily with the push of the button on the charging handle.
5 out of 5

chan – November 11, 2025

Simple time saver. My charging port is on the right rear of the car and my juice box charger is at the right front fender. The cord easily reaches but plug, plugging and unplugging, sneaking by the side of the car thatâ€™s close to my workbench is difficult. Now I leave the cord unwound and the charging cable plugged into this port at the right rear of my car on my garage wall. Easy easy easy thank you. Easily installed, works great, simple design.

Add a review Cancel reply

Anina EV Charger Holder SAE J1772 Charging Cable Organizer for Portable Electric Car Charger Cable Hanger Electric Vehicle Charging Cord Holder Wall-Mount Connector Space Saving

Related products

EVIQO Level 2 EV Charger 40 Amp – 9.6 kW 240V Wall Home EV Charger Level 2, NEMA 14-50 Plug, J1772 25′ Cable – Enhanced Wi-Fi – UL, ETL Certified EVSE, Smart Electric Vehicle…

Car Cup Holder Coaster for GMC AT4,Silicone Cupholder Coaster,Car Interior Accessories,2.76 Inch 2 Pieces

Raylix 16A Level 1 2 EV Charger, 110V-240V Electric Car Charger with 21ft Cable, Adjustable Current and Delay Charging Portable EV Chargers, for All SAE J1772 Nema 6-20/5-15…

EV Charger Port Cover, Strong Magnetic, Waterproof Rainproof Snowproof Dustproof & Durable, All-Weather Protection, Suitable for All Steel-Bodied Electric Vehicles (Classic)

Meguiar’s G16402 Whole Car Air Re-Fresher Odor Eliminator Mist, New Car Scent, 2 Fluid Ounces

Seat Cushion, Office Chair Seat Cushions for Office Chair with L-Shaped Ergonomic Design, Memory Foam Chair Cushion for Long Sitting Office Worker(Black Gray)

Lectron NACS to CCS Electric Vehicle Adapter – 500 Amps / 1,000V – Compatible with Tesla Superchargers – Fast Charge CCS1 EVs with Vortex Plug [Check with Your Automaker for…

Benazcap Car Seat Cushion – Memory Foam Car Seat Pad – Sciatica & Lower Back Pain Relief – Car Seat Cushions for Driving – Road Trip Essentials for Drivers

MECMO EV Charger Holder SAE J1772 Wall Mount Charging Cable Hanger Organizer, Nozzle Holster Dock Electric Vehicle EVSE PHEV Car Plug Space Saving Garage Wall Connector Cord…

SEVEN SPARTA Charging Cable Holder with Chassis Bracket Compatible with Tesla Model 3 Model Y Model X Model S Charger Cable Organizer Car Accessories Wall Connector, Patent…